Basic Info.
Product Description
1. The profile B7 Ultrathanpiston seal is a lipseal which fits tightly in the groove. This seal may be used for all applications where the physical properties of normal or fabric reinforced elastomers are insufficient.
2. Range of application
Mainly for the sealing of pistons in heavy duty applications in mobile and stationary hydraulics.
Operating pressure ≤400 bar
Operating temperature -35°ºC to +110ºC
Sliding speed ≤0.5m/s
Media Hydraulic oils based on mineral oil
3.Compounds
The Ultrathan P5008 compound is a Parker material based on polyurethane with a hardness of approx. 93 Shore A. Its main advantages in comparison with other poly urethane materials currently available on the market are the increased heat resistance and the lower compression set.
For media containing water, we recommend our hydrolysis-resistant polyurethane compound P5001.
4. Size Chart:
| D* d * H | D* d * H | D* d * H | D* d * H | | 14*5.8*5.5 | 63*53*6 | 90*80*6 | 130*115*9 | | 16*8*5.8 | 63*53*7 | 90*80*7 | 140*125*9 | | 16*8*6 | 63*53*7.3 | 90*80*8 | 150*135*9 | | 16*8*7 | 63*53*8 | 90*80*9 | 160*140*14.5 | | 16*10*6 | 63*55*5.7 | 95*75*12 | 165*150*9 | | 16*10*8 | 65*55*6 | 100*80*12 | 180*150*18 | | 24*16*5 | 65*55*7.3 | 100*85*8.5 | 180*152*18 | | 26*18*5 | 70*50*10 | 100*85*9 | 200*175*18.2 | | 30*22.4*5 | 70*55*10 | 100*85*11.4 | 200*175*18.5 | | 32*24*5.7 | 70*55*9 | 100*85*12 | 200*180*12 | | 40*30*6 | 70*60*6 | 100*90*6 | 220*200*12 | | 40*30.5*10 | 70*60*7 | 100*90*7 | 220*200*15 | | 40*32*5.7 | 70*60*12 | 100*90*8 | 230*205*19 | | 40*32*6 | 75*60*9 | 100*90*9 | 250*225*18.2 | | 45*35*6 | 75*65*6 | 105*90*9 | 250*230*15 | | 50*35*9 | 75*65*7 | 105*90*11.4 | 260*240*12 | | 50*40*6 | 80*60*12 | 105*95*12 | 280*255*19 | | 50*40*7 | 80*65*8.6 | 110*90*15 | 320*290*20 | | 50*40*7.3 | 80*65*9 | 110*95*9 | 330*300*24 | | 50*40*8 | 80*65*10 | 115*100*9 | | | 50*42*5.7 | 80*65*11.4 | 115*95*12 | | | 56*45*7 | 80*70*6 | 120*100*12 | | | 60*45*13 | 80*70*7 | 120*105*9 | | | 60*50*6 | 80*70*8 | 120*106*8.5 | | | 60*50*7.3 | 80*70*9 | 125*100*10 | | | 60*50*8 | 80*70*10 | 125*110*9 | | | 63*48*9 | 90*70*12 | 125*105*14.5 | | | 63*48*10 | 90*75*9 | 125*109*18 | | | 63*51*7 | 90*75*11.4 | 130*110*15 | |
|
5.Product section view:
The above models are only some products. If you need other models, please contact customer service
6.Product advantage
Robust seal profile for harshest operat- ing conditions.
Extreme wear resistance. Easier installation.
Suitable for fully automatic installation. Assembly on one-part piston is pos- sible.
Insensitive to pressure peaks. High extrusion resistance.
Excellent media resistance in case of suitable compound selection. Suitable compounds available for special requirements of the chemical process industry.
Suitable compounds available for spe- cial requirements of the food processing industry.
Dimensions according to lsO 5597 Installation in closed and undercut housings.
Additional sizes of machined products available on short notice.
7.Factory and packaging
in case of specal operating conditions (specific pressure loads, temperature, speed, use in water. HFA HFB fluids etc.), please contact our consultancy service for a selection of the material and design best suiting your particular application requirements.
8.Installation
The seals should have an axial clearance (see columns H and 1). To avoid damage at the sealing lips, the seals should not be pulled over sharp edges during installation. Normally these seals may be snapped into closed grooves. Where access is restricted special assembly tools may be required. Proposals for the design of such tools wil be provided on request.
in case of special operating conditions (speafic pressure loads. temperature, speed, use in water, HFA. HFB fuids etc.).please contact our consutancy service for a selection of the material and design best suiting your particular application requirements.
9.
| FAQ: | | |
| Q:Are you trading company or manufacturer?A:We are manufacturer. | | |
| | | |
| Q:How long is your delivery time? A:Generally it is 5-10 days if the goods are in stock, or 15-20 days if the goods are not in | | |
| stock. It is according to the | | |
| quantity. | | |
| | | |
| Q:Do you provide samples? Is it free or extra? A:Yes, we can offer the samples for free charge but you need to pay the cost of the | | |
| freight. | | |
| | | |
| Q:What is your terms of payment? A:Payment≤1000USD, 100% in advance. Payment≥1000USD,30%T/T in advance, balance before shipment. | | |
| If you have any other questions, please feel free to contact us as below.CONTACT US | | |
| | | |
| | | |
| | | |
Address:
Third Floor, Gate of Luohe Huixin Building Materials City, No. 99, Longjiang Road, Luohe, Henan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
){kind=link}