Agricultural Equipment Hydraulic Rod Wiper Seal, Kr Rubber Oil Seal 63*47.5*6.3

1. Range of application
The KR profile is suitable for use in all standard industrial cylinders as well as in farm ing equipment, light construction machinery and mobile devices. Due to the excep tionally high dynamic sealing performance, it is particularly suited for leakage-critical applications.

Operating pressure ≤300 bar
Operating temperature -35°ºCto +110ºC
Sliding speed ≤0.5 m/s

2. Compounds
Slide ring: Ultrathan P5062, modified polyurethane with a hardness of approximately55 Shore D.
Expander ring: NB078, NBR-elastomer with a hardness of approximately 80 Shore A. Installation
The installation groove must be carefully deburred and cleaned. The cylinder bore must have a leading edge chamfer. Profile KR can be snapped into closed grooves.
in case of special operating conditions (specific pressure loads, temperature, speed, use in water, HFA. HFB fluids etc.), please contact our consultancy service for a selection of the material and design best suit- ing your particular application requirements.

3. Size Chart:

The above models are only some products. If you need other models, please contact customer service    

4. Product section view

5. Product advantage

Exceptionally high static and dynamic sealing performance.
Good sealing performance in extremely small assembly conditions.
Can also be used for single-acting applications.
Robust seal profile for harshest operating conditions.
Extreme wear resistance.
Long service life thanks to application- optimized compounds.
Constantly low dynamic friction throughout the part's service life. Easy snap assembly on a single-part piston.
Insensitive to pressure peaks.
Functional reliability at critical temperatures.
High extrusion resistance.
Dimensions according to ISO 7425-1. Short axial assembly length.
Installation in closed and undercut housings.

6. Factory and packaging

in case of specal operating conditions (specific pressure loads, temperature, speed, use in water. HFA HFB fluids etc.), please contact our consultancy service for a selection of the material and design best suiting your particular application requirements.

7. Installation
Sharp edges and burrs in the assembly area of the seal must be removed. Assembly is performed in the following sequence: ..rubber seal, anti-extrusion rings, angular guide rings". Ensure that the contact points (gaps) of the angular guide and anti-extrusion rings are arranged in staggering positions.

in case of specal operating conditions (specific pressure loads, temperature, speed, use in water. HFA HFB fuids etc.), please contact our consultancy service for a selection of the material and design best suit- ing your particular application requirements.

8. FAQ

Q:Are you trading company or manufacturer?A:We are manufacturer.

Q:How long is your delivery time? A:Generally it is 5-10 days if the goods are in stock, or 15-20 days if the goods are not in
stock. It is according to the
quantity.

Q:Do you provide samples? Is it free or extra? A:Yes, we can offer the samples for free charge but you need to pay the cost of the
freight.

Q:What is your terms of payment? A:Payment≤1000USD, 100% in advance. Payment≥1000USD,30%T/T in advance, balance before shipment.
If you have any other questions, please feel free to contact us